Making 90 Degree Shower Curtain Rod

Home » Bathroom » Making 90 Degree Shower Curtain Rod

90 degree shower curtain rod is a good way to create a customized curtain rod, and may end up being a lot cheaper than buying an L-shaped rod, or have a plumber install one. You can use copper to make a curtain rod, and you do not have to do any welding experience to get the job done.

Posted on November 9, 2017 Bathroom With 0 comments

Instructions

Measure the outer edge of a bathtub or shower hand basin and end where you want the 90 degree shower curtain rod to go. Cut two pieces of copper pipe to length and width measurements are taken using pipe cutters or a hacksaw. Insert the end of the length piece to one side of a three-way pipe fitting, and end of the piece the width of the other side, with the remaining opening up.

12 Photos Gallery of: Making 90 Degree Shower Curtain Rod

RELATED TOPIC :  The Surprising Jacuzzi Benefits You Need to Know

This will make a corner, and gives you the 90 degree for the curtain rod. Measure down from the ceiling to the height you want the 90 degree shower curtain rod to hang, and cut a third piece of copper tubing to this length. Insert a mounting flange on the free end of the length, width and height of the upright tubes, and connect the flanges to the pipes with screws supplied flanges. Attach the flanges to the walls and ceiling with screws included with the mounting flanges.

Tags: 90 curtain rod, 90 degree curtain rod, 90 degree shower curtain rod, 90 degree shower rod, 90 shower curtain, copper pipe shower curtain rod, copper shower curtain rod, ou shower curtain